Lightning protection wire clip product introduction Lightning protection wire clip, lightning protection arc clip (piercing/non-piercing) is a product with a new structure, which is mainly installed on the load side of the line insulator, and has the function of preventing 10KV overhead insulated wire from being broken by lightning strikes The lightning protection and arc protection clip products have a piercing thorn tooth structure, which is convenient for installation and construction, and does not need to peel off the insulating layer, which can avoid water ingress and corrosion of the core, and can also greatly reduce the labor intensity of the staff.
⒈ Lightning protection arc clamp is a product with a new structure, which is mainly composed of insulating shield, wire clamp seat, puncture pressure block, compression nut arc ball and grounding plate. ⒉ Lightning protection fittings, the bottom of the lightning protection wire clamp seat is the arc ball with spherical structure. When a lightning strike occurs, there is discharge between the arc ball and the ground plate, so that the continuous power frequency arc moves to the arc ball metal ball and burns. thus play a protective role. 3. Lightning protection hardware, lightning protection arc clip insulation shield is made of organic composite material, which has good insulation performance, anti-aging performance and flame retardant performance. It can be assembled outside the wire clip to play the role of insulation protection . The insulating shield is made of organic composite material, which has good insulation performance, anti-aging performance and flame retardant performance. It can be assembled outside the wire clamp to play the role of insulation protection.
