1. Product Name: Induction Voltage Regulator 2. Product model number: TSJA- 3. Rated capacity: 30KVA-1000kVA 4. Number of phases: three-phase 5. Frequency: 50Hz-60HZ 6. Rated input voltage: AC 380V 7. Output voltage range: AC 0-420V 0-630V 0-760V0-500V 0-430V 0-1200V can be customized according to requirements 8. Starting voltage: not greater than the value (5V) 9. Rated output current: rated A 10. Cooling method: oil immersion self-cooling 11. Insulation class: Class A 12. Wiring method: Y 13. Electrical method: induction auto coupling 14. Working mode: long-term continuous operation 15. Voltage regulation mode: electric, manual 16. Three-phase asymmetry: Under the condition that the three-phase input voltage is symmetrical and the rated value, the asymmetry of the three-phase no-load output voltage value of the voltage regulator is less than or equal to 1% 17. Voltage regulation time: ≤1.5min 18. Noise: <80dB 19. Dimensions: / Diameter 1550mm, Height 2150mm 20. Weight: /2600kg 
1. Non-contact adjustment, long service life; 2. Applicable to loads of various natures; 3. Strong overload capacity; 4 .Reliable operation, easy to use and maintain Environmental conditions: 1. Altitude: ≤1000M 2. Ambient temperature: -10～+40℃ 3. Relative humidity: the average relative humidity of the year and month is not more than 90% 4. Use environment: indoor 5. The installation site is well ventilated, without serious vibration and turbulence, and without gas, steam, dust, dirt, chemical deposits and other explosive and corrosive media that seriously affect the insulation of the regulator.
Selection: 1. The user's voltage situation The user is required to detect the no-load voltage value and the load voltage value. 2. The distance between the transformer and the electrical equipment The user needs to measure the distance between the user's transformer and its electrical equipment. 3. The user's cable situation The user needs to check the situation of the cable used by himself. Generally, it is necessary to match the total power of the equipment. 4. The total power of the starting equipment The user should check the total power of the equipment used by himself. According to the above information, the user can choose the corresponding model product or propose customization. Ordering instructions: When ordering, the product model, capacity, rated output voltage, rated input voltage, power input and output position, etc. should be stated; If there is a special request, it must be explained in detail, and the consumption can be designed according to the user's request;
